The following table describes the labels in this screen.
LABEL DESCRIPTION
Filter Name Enter an outbound IP filter rule name.
Protocol Select a protocol from the drop-down list.
Source IP address
Enter a source IP address.
Source Subnet Mask Enter a source subnet mask.
Source Port Enter a source port.
Destination IP address Enter a destination IP address.
Destination Subnet Mask Enter a destination subnet mask.
Destination Port Enter a destination port.
When you are making changes, the ACTIVE OUTBOUND IP FILTER
will show the relevant information after you click on Add/Apply button.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Name Show the name of active outbound IP filter rule.
32
To Next Page
