D-Link DSL-2700U - DHCP Table; DHCP Relay

the network as it boots up. A device must be configured as a DHCP
client to obtain the IP address automatically. The DHCP address pool
contains the range of the IP address that will automatically be
assigned to the clients on the network.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Enable DHCP Server
Select whether you can acquire an IP address automatically.
DHCP IP Address Range
Enter the IP address range you wish to use as the DHCP server's IP
assignment.
DHCP Lease Time
Enter the amount of time you wish to lease out a given IP address.
When you are making changes, click on Save Settings to save your
changes.
DHCP Table
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Host Name Show the hostname of LAN PC here.
IP Address Show the LAN PC’s IP obtained from DHCP server.
MAC Address Show the LAN PC’s MAC address.
Status Show the status of obtained IP address from the DHCP server.
DHCP Relay
23