Source IP address Enter a source IP address.
Source Subnet Mask Enter a source subnet mask.
Source Port Enter a source port.
Destination IP address Enter a destination IP address.
Destination Subnet Mask Enter a destination subnet mask.
Destination Port Enter a destination port.
When you are making changes, the ACTIVE INBOUND IP FILTER will
show the relevant information after you click on Add/Apply button.
The following table describes the labels in this screen.
LABEL
Name Show the name of active inbound IP filter rule.
Protocol Show the protocol of active inbound IP filter rule.
Src. Addr./Mask Show the source address and mask of active inbound IP filter rule.
Src. Port Show the source port of active inbound IP filter rule.
Dest. Addr./Mask Show the destination address and mask of active inbound IP filter rule.
Dest. Port Show the destination port of active inbound IP filter rule.
Remove Select the removed active inbound IP filter rule.
Static Route
Add Routing Entry
34
To Next Page
Loading...
