D-Link DSL-2700U - Page 40

The following table describes the labels in this screen.
LABEL DESCRIPTION
Destination IP Address
Enter a destination IP address.
IP Subnet Mask
Enter a destination IP mask.
Gateway IP Address
Enter a gateway IP address.
Metric
Fill with the Metrics value which you can get or
calculate.
Announced in RIP
Selecting RIP routing protocol mode or not.
When you are making changes, the ACTIVE ROUTING TABLE LIST
will show the relevant information after you click on Add/Apply button.
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Dest IP Show the destination IP address.
Mask Show the destination IP mask.
Gateway IP Show the gateway IP address.
Metric Show the metric value for the connecting.
Device Show the Ethernet interface port information.
Use Show the packets number of the using port.
Remove Select the removed from active routing table list.
35