When you are making changes, the ACTIVE WIRELESS QOS RULES
will show the relevant information after you click on Add/Apply button.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Name Show the name of active wireless QoS rule.
Priority Show the priority of active wireless QoS rule.
Protocol Show the protocol of active wireless QoS rule.
Src. IP Range Show the source IP range of active wireless QoS rule.
Src. Port Show the source port of active wireless QoS rule.
Dest.IP Range Show the destination IP range of active wireless QoS rule.
Dest. IP Port Show the destination port of active wireless QoS rule.
Remove Select the removed active wireless QoS rule.
If you click the button labeled LAN QoS, the next screen will be shown
following.
The following table describes the labels in this screen.
LABEL DESCRIPTION
Name Enter a LAN QoS rules name.
Priority Select a priority from the drop-down list.
Protocol Select a protocol from the drop-down list.
Source IP Range Enter the source IP range and mask.
Source Port Range Enter the source port range.
30
To Next Page
Loading...
