D-Link DSL-520B User Guide

Section 3 – Configuration
QUICK SETUP – PPPoE
This window allows you to enable IGMP multicasting and WAN service.
Click the Next button to continue.
QUICK SETUP – PPPoE
This window allows you to enter an IP address and subnet mask for the
LAN interface. In addition, you can either enable or disable the DHCP
server.
To enable the DHCP server, enter a starting IP address, an ending IP
address and a subnet mask. You may also choose to change the default
value of the leased time. Click the Next button to continue.
D-Link DSL-520B User Manual
27

D-Link DSL-520B Specifications

Data Transfer Rates

G.dmt full rate downstream	up to 8 Mbps
G.dmt full rate upstream	up to 1 Mbps
G.lite downstream	up to 1.5 Mbps
G.lite upstream	up to 512 Kbps
G.dmt.bis full rate downstream	up to 12 Mbps
G.dmt.bis full rate upstream	up to 12 Mbps
ADSL full rate downstream	up to 24 Mbps
ADSL full rate upstream	up to 1 Mbps

Interfaces

ADSL interface	RJ-11 connector
LAN interface	RJ-45 port
Ethernet	10/100BASE-T