64D-Link DSL-5300 User Manual
Section 4 - Conguration
Universal beamforming allows basic beamforming features in
compatibility mode to support legacy adaptors. This feature is
disabled by default.
Set your region correctly to ensure compatibility with local equipment
and compliance with local laws. The default setting is Australia.
USB 3.0 sometimes interferes with 2.4 GHz wireless transmissions.
This setting moderates the speed of the included USB 3.0 port to
reduce interference. This setting is enabled by default.
Select to enable IAS (Internet Authentication Service). This feature
is disabled by default.
Click Save when you are done.
Universal
Beamforming:
Region:
Reducing
USB 3.0
Interference:
IAS Enabled:
To Next Page
Loading...
