EasyManuals Logo

D-Link DSL-G225 User Manual

D-Link DSL-G225
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
19D-Link DSL-G225 Wireless N300 ADSL2+/VDSL2 Modem Router User Manual
Section 3 - Getting Started
Step 4: Congure Wireless Network
This step of the wizard allows you to congure your Wireless network settings.
By default, wireless is enabled. If you want to disable the DSL-G225’s wireless
capability, uncheck Enable Your Wireless Network.
Under Wireless Network Name (SSID) you can change the SSID of your
wireless network, for easier identication by wireless clients. If Visibility
Status is set to Visible, this name will show up when a client in range scans
for wireless networks. Otherwise, if your network is Invisible, clients will have
to enter the SSID in order to connect.
Choose the best security level that is compatible with your wireless
clients. WPA2-PSK is recommended. Unless you chose None (this is NOT
recommended), you will need to enter a key below. Wireless clients requesting
a connection with the network will need to enter this key in order to connect.
Click Next to continue.

Table of Contents

Other manuals for D-Link DSL-G225

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSL-G225 and is the answer not in the manual?

D-Link DSL-G225 Specifications

Power IconPower
input voltage100~240 V
input frequency50~60 Hz
output voltageDC 12 V
Operating Environment IconOperating Environment
operating temperature0 to 40 °C
non-operating temperature-20 to 65 °C
operating humidity0% - 90% non-condensing
Weight and Dimensions IconWeight and Dimensions
dimensions131.5 x 74.3 x 185.4 mm
weight285 grams

Related product manuals