D-Link DSR-150 - Dot11 Radio Advanced Configure; Dot11 Accesspoint Wps Configure; Dot11 Accesspoint ACL Configure <Ltap_Name

Unified Services Router CLI Reference Guide
107
11.10 dot11 radio advanced configure
S.No
Command Name
Description
Type and Description
1
save
Save advanced AP configuration changes
2
cancel
Roll back advanced AP configuration changes
3
exit
Save advanced AP configuration changes and exit current
mode.
4
beacon_interval
Set the time betw een beacon transmissions (in milliseconds).
Dot11 BEACON Interval.
5
dtim_interval
Set the interval betw een delivery traffic indication message.
Dot11 Dtim Interval.
6
rts_threshold
Set the Request to Send (RTS) threshold.
Dot11 Rts thresold Interval.
7
fragmentation_threshold
Set the maximum length of the frame.
Dot11 Fragmentation
Interval.
8
preamble_mode
Set the 802.11b preamble type to be prepended to every
frame
802.11b Preamble Types
9
protection_mode
Enable/disable RTS/CTS handshake before packet
transmission.
RTSCTS Protection mode
10
short_retry_limit
Set the retry limit for frame retransmission on transmission
failure.
802.11 Retry Limit
11
long_retry_limit
Set the retry limit for frame retransmission on transmission
failure.
802.11 Retry Limit
12
power_save_enable
Enable/Disable pow er save mode .
Boolean choice
11.11 dot11 accesspoint wps configure
S.No
Command Name
Description
Type and Description
1
save
Save WPS configuration changes
2
cancel
Roll back WPS configuration changes
3
exit
Save WPS configuration changes and exit current mode.
4
access_point
Acess point.
String
5
w ps_status
WPS status.
WPS status
6
configure_via_pin
configure WPS via PIN.
Boolean choice
7
configure_via_pbc
configure WPS via PBC.
Boolean choice
8
station_pin
Set PIN for WPS config.
String
11.12 dot11 accesspoint ACL configure
<ltap_name>
S.No
Command
Name
Description
Type and Description
1
<ltap_name>
802.11 AP ACL configuration mode.
String
2
save
Save AP ACL configuration changes.
3
cancel
Roll back AP ACL configuration changes
4
exit
Save AP ACL configuration changes and
exit current mode.
5
acl_policy
Set accesspoint ACL Policy.