EasyManuals Logo

D-Link DSR-150 Reference Guide

D-Link DSR-150
129 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
Unified Services Router CLI Reference Guide
75
9.3 security advanced_network igmp
allowedsubnets add
S.No
Command Name
Description
Type and Description
1
save
Save muticast source subnet
configuration
2
exit
Save igmp configuration changes
and exit current mode.
3
cancel
Roll back igmp configuration
changes.
4
multicast_source_address
Enter the address of the multicast
source
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
5
multicast_source_masklength
Enter the masklength of the multicast
source address
number in range of 1 to 32
9.4 security advanced_network igmp
allowedsubnets edit <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Edit network address and mask
length of multicast source
Unsigned integer
2
save
Save muticast source subnet
configuration
3
exit
Save igmp configuration changes
and exit current mode.
4
cancel
Roll back igmp configuration
changes.
5
multicast_source_address
Enter the address of the multicast
source
IP address AAA.BBB.CCC.DDD w here each
part is in the range 0-255
6
multicast_source_masklength
Enter the masklength of the multicast
source address
number in range of 1 to 32
9.5 security advanced_network igmp
allowedsubnets delete <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
delete netw ork address and masklength of multicast source
Unsigned integer
9.6 security advanced_network ips setup
S.No
Command Name
Description
Type and Description
1
save
Save ips configuration changes.
2
exit
Save ips configuration changes and exit current mode.
3
cancel
Roll back ips configuration changes.
4
enable_intrusion_prevention
Enable or Disable Intrusion Prevention.
Boolean choice
5
enable_intrusion_detection
Enable or Disable Intrusion Detection.
Boolean choice
6
ips_check_active
Enable or Disable IPS checks.
7
ips_check_active lan-wan
Enable or Disable ips checks active between LAN and WAN.
Boolean choice

Table of Contents

Other manuals for D-Link DSR-150

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DSR-150 and is the answer not in the manual?

D-Link DSR-150 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
PC in (D-Sub)No
USB ports quantity0
Ethernet LAN (RJ-45) ports8
Supported network protocolsIPSec, PPTP, L2TP
Security algorithms3DES, DES, SSL/TLS
VPN tunnels quantity21
Filtering descriptionKeyword
MAC address filtering-
SafetycUL, LVD (EN60950-1)
CertificationWEEE
Electromagnetic compatibilityFCC Class B, CE Class B, C-Tick, IC
Mean time between failures (MTBF)240000 h
Input current1.5 A
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)7.44 W
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Product colorBlack
Input voltage12 V
Ports quantityThe number of ports or external interfaces to which other equipment can be connected.
Management platformHTTP, HTTPS, CLI, SNMP v1/v2c/v3
Connectivity technologyWired
Compliance industry standardsRoHS
Weight and Dimensions IconWeight and Dimensions
Depth118 mm
Width208 mm
Height35 mm
Weight- g

Related product manuals