D-Link DSR-150 - Vpn Pptp Client_Action <Ltaction; Vpn Pptp Server Configure

Unified Services Router CLI Reference Guide
110
in the range 0-255
7
remote_subnet
Remote Netw ork Subnet Mask
Unsigned integer
8
username
Username allocated to client
String
9
password
Passw ord allocated to client
String
10
mppe_enable
Enable mppe encryption
Boolean choice
11
time_out
Time Out
Unsigned integer
12.3 vpn pptp client_action <ltaction>
S.No
Command Name
Description
Type and Description
1
<ltaction>
vpn pptp client action set.
Boolean choice
12.4 vpn pptp server configure
S.No
Command Name
Description
Type and Description
1
save
Save pptp server configuration changes.
2
cancel
Roll back pptp server configuration
changes.
3
exit
Save pptp server configuration changes
and exit current mode.
4
enable_v4
enable/disable PPTP server in IPv4 mode
only.
Boolean choice
5
enable_v6
enable/disable PPTP server in IPv4/IPv6
mode.
Boolean choice
6
Natenable
enable/disable PPTP NAT routing mode
Boolean choice
7
start_address
PPTP server starting IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
8
end_address
PPTP server ending IP address.
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
9
ipv6_prefix
PPTP server IPv6 Prefix
IP address AAA.BBB.CCC.DDD w here each part
is in the range 0-255
10
pap_enable
PPTP server PAP authentication
Boolean choice
11
chap_enable
PPTP server CHAP authentication
Boolean choice
12
mschap_enable
PPTP server MSCHAP authentication
Boolean choice
13
mschapv2_enable
PPTP server MSCHAPV2 authentication
Boolean choice
14
Mppe40Enable
PPTP server Mppe40
Boolean choice
15
Mppe128Enable
PPTP server Mppe128
Boolean choice
16
MppeStatefulEnable
PPTP server MppeStateful
Boolean choice
17
UserTimeOut
PPTP server User TimeOut
Unsigned integer