D-Link DSR-150 - Security Firewall Algs; Security Firewall Ipv6 Configure

Unified Services Router CLI Reference Guide
81
3
exit
Save Firew all IPV4 rule reordering changes and
exit current mode.
4
cancel
Roll back IPV4 rule reordering changes.
5
position
New position for the rule
Unsigned integer
9.20 security firewall algs
S.No
Command Name
Description
Type and Description
1
save
Save Firew all algs changes.
2
exit
Save Firew all algs changes and exit current mode.
3
cancel
Roll Firew all algs changes.
4
PPTP
Protocal to be enabled at ALGs
Boolean choice
5
Ipsec
Protocal to be enabled at ALGs
Boolean choice
6
Rtsp
Protocal to be enabled at ALGs
Boolean choice
7
Sip
Protocal to be enabled at ALGs
Boolean choice
8
H323
Protocal to be enabled at ALGs
Boolean choice
9
Smtp
Protocal to be enabled at ALGs
Boolean choice
10
Dns
Protocal to be enabled at ALGs
Boolean choice
11
Tftp
Protocal to be enabled at ALGs
Boolean choice
9.21 security firewall ipv6 configure
S.No
Command Name
Description
Type and Description
1
save
Save Firew all IPV6 rules
configuration changes.
2
exit
Save Firew all IPV6 rules
configuration changes and exit
current mode.
3
cancel
Roll back IPV6 rules configuration
changes.
4
rule_type
Type of rule to be added
firew all rule type
5
service
.
6
service service_custom
Name of the custom service for
w hich a rule is to be added
custom name should already be
added into custom service
String
7
service service_normal
Name of the service for which a
rule is to be added
service type
8
action
Action to be taken by the rule
firew all rule action type
9
schedule
Schedule for which the rule is
applicable
String
10
source_address_type
Type of the source user
firew all rule address type
11
destination_address_type
Type of the destination user
firew all rule address type
12
log
Log Always or Never
firew all rule log enable/disable