D-Link DSR-150 - Security Firewall Ipv4 Default _Outbound_Policy <Ltdefault_Outbound_Policy; Security Firewall Ipv4 Edit <Ltrow_Id

Unified Services Router CLI Reference Guide
79
24
dnat_port
The port number to use for DNAT, required if port
forwarding is enabled
Port number
25
port_forwarding_enable
enable/disable port forwarding based on this firewall
rule configuration settings
Boolean choice
26
internal_ip_address
Send to Local Server (DNAT IP),Specifies an IP
address and port number of a machine on the Local
Netw ork which is hosting the server.
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
27
dnat_ipaddress
Set it as Dedicated/configured WAN
WAN interface type
9.14 security firewall ipv4
default_outbound_policy
<ltdefault_outbound_policy>
S.No
Command Name
Description
Type and Description
1
<ltdefault_outbound_policy>
Firew all Settings, Default Outbound Policy configuration mode.
Boolean choice
9.15 security firewall ipv4 edit <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV4 rules configuration mode.
Unsigned integer
2
save
Save Firew all IPV4 rules configuration changes.
3
exit
Save Firew all IPV4 rules configuration changes and
exit current mode.
4
cancel
Roll back IPV4 rules configuration changes.
5
from_zone
Set from Zone security type
firew all rule type
6
from_zone_vlan
Set From Zone VLAN using corresponding VLAN
name
String
7
to_zone
Set to Zone security type
firew all rule type
8
to_zone_vlan
Set To Zone VLAN using corresponding VLAN name
String
9
service
.
10
service service_custom
Name of the custom service for which a rule is to be
added custom name should already be added into
custom service
String
11
service service_normal
Name of the service for which a rule is to be added
service type
12
action
Action to be taken by the rule
firew all rule action type
13
schedule
Name of schedule for which the rule is applicable
String
14
source_address_type
Type of the source user
firew all rule address type
15
destination_address_type
Type of the destination user
firew all rule address type
16
snat_address_type
Type of the SNAT address
firew all rule snat address type
17
log
Log Always or Never
firew all rule log enable/disable
18
source_address_start
IP of the Source user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-