D-Link DSR-150 - Security Firewall Ipv6 Enable <Ltrow_Id; Security Firewall Ipv6 Disable <Ltrow_Id; Security Firewall Ipv6 Delete <Ltrow_Id; Security Firewall Ipv6 Move <Ltrow_Id

Unified Services Router CLI Reference Guide
83
String
17
destination_start_address
IP of the Destination user
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd where
each part is in the range [0-9A-Fa-f:]
18
destination_end_address
IP of the Destiation user
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abcd:abcd where
each part is in the range [0-9A-Fa-f:]
19
destination_address_prefix
Prefix Length of the Destination
user
String
9.23 security firewall ipv6 enable <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV6 rules configuration mode.
Unsigned integer
9.24 security firewall ipv6 disable <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV6 Rules configuration mode.
Unsigned integer
9.25 security firewall ipv6 delete <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV6 Rules configuration mode.
Unsigned integer
9.26 security firewall ipv6 move <ltrow_id>
S.No
Command
Name
Description
Type and Description
1
<ltrow_id>
Firew all IPV6 Rule reordering mode.
Row id(s) a,b,c w here each part is a valid row id
in the range [0-9]
2
save
Save Firew all IPV6 rule reordering changes.
3
exit
Save Firew all IPV6 rule reordering changes and
exit current mode.
4
cancel
Roll back IPV6 rule reordering changes.
5
position
New position for the rule
Unsigned integer
9.27 security firewall ipv6
default_outbound_policy
<ltdefault_outbound_policy>
S.No
Command Name
Description
Type and
Description
1
<ltdefault_outbound_policy>
Firew all Settings, IPv6 Default Outbound Policy configuration
mode.
Boolean choice