D-Link DSR-150 - Net Radvd Pool Edit <Ltrow_Id; Net Radvd Pool Delete <Ltrow_Id; Net Routing Dynamic Configure

Unified Services Router CLI Reference Guide
68
changes.
4
prefix_type
Option whether to select the prefix type
as 6to4 or Global/Local/ISATAP
ipv6 prefix type
5
sla_id
The SLA ID (Site-Level Aggregation
Identifier) in the 6to4 address prefix is set
to the interface ID of the interface on
w hich the advertisements are sent
Unsigned integer
6
prefix_address
It specifies the IPv6 netw ork address
String
7
prefix_length
The prefix length variable is a decimal
value that indicates the number of
contiguous, higher order bits of the
address that make up the network portion
of the address
Unsigned integer
8
prefix_life_time
The length of time over w hich the
requesting router is allow ed to use the
prefix
Unsigned integer
8.49 net radvd pool edit <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
radvd Pool configuration mode.
Unsigned integer
2
save
Save radvd Pool configuration changes.
3
exit
Save radvd Pool configuration changes
and exit current mode.
4
cancel
Roll back radvd Pool configuration
changes.
5
prefix_type
Option whether to select the prefix type
as 6to4 or Global/Local/ISATAP
ipv6 prefix type
6
sla_id
The SLA ID (Site-Level Aggregation
Identifier) in the 6to4 address prefix is set
to the interface ID of the interface on
w hich the advertisements are sent
Unsigned integer
7
prefix_address
It specifies the IPv6 netw ork address
String
8
prefix_length
The prefix length variable is a decimal
value that indicates the number of
contiguous, higher order bits of the
address that make up the network portion
of the address
Unsigned integer
9
prefix_life_time
The length of time over w hich the
requesting router is allow ed to use the
prefix
Unsigned integer
8.50 net radvd pool delete <ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
radvd pool configuration mode.
Unsigned integer
8.51 net routing dynamic configure
S.No
Command Name
Description
Type and Description
1
save
Save dynamic route changes.
2
exit
Save dynamic routes changes and exit
current mode.
3
cancel
Roll back rip configuration changes.