Unified Services Router    CLI  Reference Guide 
 
80 
 
 
IP address AAA.BBB.CCC.DDD 
w here each part is in the range 0-
255 
destination_address_start  
IP of the Destination user  
 
IP address AAA.BBB.CCC.DDD 
w here each part is in the range 0-
255 
IP of the Destiation user  
 
IP address AAA.BBB.CCC.DDD 
w here each part is in the range 0-
255 
Firew all type of service  
 
firew all type of service 
WAN interface for Source NAT settings  
 
IP address AAA.BBB.CCC.DDD 
w here each part is in the range 0-
255 
The port number to use for DNAT, required if port 
forwarding is enabled  
enable/disable port forwarding based on this firewall 
rule configuration settings  
Send to Local Server (DNAT IP),Specifies an IP 
address and port number of a machine on the Local 
Netw ork which is hosting the server.  
 
IP address AAA.BBB.CCC.DDD 
w here each part is in the range 0-
255 
Set it as Dedicated/configured WAN  
9.16 security firewall ipv4 enable <ltrow_id>  
Firew all IPV4 rules configuration mode.  
9.17 security firewall ipv4 disable <ltrow_id>  
Firew all IPV4 Rules configuration mode.  
9.18 security firewall ipv4 delete <ltrow_id>  
Firew all IPV4 Rules configuration mode.  
9.19 security firewall ipv4 move <ltrow_id>  
Firew all IPV4 Rule reordering mode.  
 
Row  id(s) a,b,c w here each part is a valid row id 
in the range [0-9] 
Save Firew all IPV4 rule reordering changes.