D-Link DSR-150 - Net Routing Protocol_Binding Enable <Ltrow_Id

Unified Services Router CLI Reference Guide
65
changes.
3
exit
Save Protocol Binding rules configuration
changes and exit current mode.
4
cancel
Roll back configuration changes.
5
Service
Available Service
service type
6
Local_Gatew ay
local gateway type
WAN interface type
7
Source_Netw ork
source network type
firew all rule address type
8
Destination_Netw ork
destination netw ork type
firew all rule address type
9
source_address_start
starting IP of the Source Netw ork
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
10
source_address_end
ending IP of the Source user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
11
destination_address_start
start IP of the Destination user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
12
destination_address_end
ending IP of the Destiation user
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
8.44 net routing protocol_binding enable
<ltrow_id>
S.No
Command Name
Description
Type and Description
1
<ltrow_id>
protocol_binding rules configuration
mode.
Unsigned integer
2
save
Save Protocol-Binding rules configuration
changes.
3
exit
Save Protocol Binding rules configuration
changes and exit current mode.
4
cancel
Roll back configuration changes.
5
Service
Available Service
service type
6
Local_Gatew ay
local gateway type
WAN interface type
7
Source_Netw ork
source network type
firew all rule address type
8
Destination_Netw ork
destination netw ork type
firew all rule address type
9
source_address_start
starting IP of the Source Netw ork
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
10
source_address_end
ending IP of the Source user
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255
11
destination_address_start
start IP of the Destination user
IP address
AAA.BBB.CCC.DDD w here
each part is in the range 0-255