D-Link DSR-150 - Chapter 9. Configuration Commands under Branch SECURITY; Security Advanced_Network Attack_Checks Configure; Security Advanced_Network Igmp Setup

Unified Services Router CLI Reference Guide
74
Chapter 9. Configuration commands
under branch SECURITY
9.1 security advanced_network attack_checks
configure
S.No
Command Name
Description
Type and Description
1
save
Save Security Checks configuration changes.
2
exit
Save Security Checks configuration changes
and exit current mode.
3
cancel
Roll back Security Checks configuration
changes.
4
enable_stealth_mode
Enable or Disable Stealth Mode.
Boolean choice
5
block_tcp_flood
Enable or Disable TCP Flood on WAN port.
Boolean choice
6
block_udp_flood
Enable or Disable UDP Flood on LAN port.
Boolean choice
7
allow _lan_icmp
Enable or Disable ICMP Notification on LAN
port.
Boolean choice
8
block_spoofed_packets
Allow /Block spoofed packets.
Boolean choice
9
Tcp_Filter_Check
Allow /Block Tcp Filter Check.
Boolean choice
10
block_icmp_notification
Enable or Disable ICMP notifications on Internet
Ports.
Boolean choice
11
block_fragmented_packets
Enable or Disable Fragmented Packets on
Internet Ports.
Boolean choice
12
block_multicast_packets
Enable or Disable Multicast packets on Internet
Ports.
Boolean choice
13
synflood_dectect_rate
Configure the Syn flood Detect Rate
range of packets sent per second in
dos attack types.
14
echostorm_flood_rate
Configure the Echo Storm Flood Rate
range of packets sent per second in
dos attack types.
15
icmp_flood_rate
Configure the ICMP flood Rate
range of packets sent per second in
dos attack types.
9.2 security advanced_network igmp setup
S.No
Command Name
Description
Type and Description
1
save
Save igmp configuration changes.
2
exit
Save igmp configuration changes and exit current mode.
3
cancel
Roll back igmp configuration changes.
4
enable_igmp_proxy
Enable or Disable Igmp Proxy.
Boolean choice