D-Link DSR-150 - Net Lan Ipv6 Configure; Net Lan Ipv6 Pool Configure <Ltipv6 Poolstartaddr

Unified Services Router CLI Reference Guide
36
8.17 net lan ipv6 configure
S.No
Command Name
Description
Type and Description
1
save
Save LAN configuration changes.
2
exit
Save LAN configuration changes and exit
current mode.
3
cancel
Roll back LAN configuration changes.
4
static
Set system LAN Settings.
5
static address
Set system LAN IP address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
6
static prefix_value
Prefix length
Unsigned integer
7
dhcp
Set system LAN Settings.
8
dhcp server_enable
Set dhcpv6 server status
Boolean choice
9
dhcp mode
DHCPv6 Mode
dhcpv6 modes
10
dhcp domain_name
dhcp server domain name
String
11
dhcp server_preference
server preference number
Unsigned integer
12
dhcp dns_type
dns server type
dhcpv6 dns server types
13
dhcp primary_dns
primary dns server
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
14
dhcp secondary_dns
Secondary dns server
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
15
dhcp rebind_time
Rebind time
number in range of 0 to 604800
8.18 net lan ipv6 pool configure
<ltipv6PoolStartAddr>
S.No
Command Name
Description
Type and Description
1
<ltipv6PoolStartAddr>
IPv6 LAN configuration add/edit mode.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
2
save
Save LAN configuration changes.
3
exit
Save LAN configuration changes and exit
current mode.
4
cancel
Roll back LAN configuration changes.
5
start_address
Set dhcpv6 start IP address.
IP address
abcd:abcd:abcd:abcd:abcd:abcd:abc
d:abcd w here each part is in the
range [0-9A-Fa-f:]
6
end_address
Set dhcpv6 end IP address.
IP address