D-Link DWM-156

15D-Link DWM-156 User Manual
Section 4 - Prole Management
Prole Management
Editing
1. Click the Prole button.
2. Select a prole and click the Edit button.
3. Click the appropriate tab and enter the information in the elds.
4. Click the Advanced button to display a list of operators and their
areas in the window below.
5. Click OK to close the APN window.
6. Click OK to close the Edit Prole window.
Note: Proles may only be edited when you are disconnected.
Deleting a Prole
1. Click the Prole button.
2. Select a user-dened prole and click the Delete button.
3. Click Yes to conrm the deletion.
Deleting All Proles
1. Click the Prole button.
2. Click the Delete All button.
Setting the Default Prole
1. Click the Prole button.
2. Highlight the prole to use when the DWM-156 is started.
3. Click Set as Default prole.
Reset to Factory Default
1. Click the Prole button.
2. Click Set as Factory Default to return the DWM-156 to the factory
settings.
Under the Proles icon, users can create, edit and delete proles as well as preset proles.
Prole