DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
Figure 88. The page for creating a new Mobile Internet connection. The Health Check section.
Parameter Description
Health Check
Enable
Move the switch to the right to check the connection health using
the ICMP ping mechanism.
The maximum number
of attempts
A number of requests to check the health of the connection. By
default, the value 10 is specified.
Several ping requests are sent to check the hosts. After several
failed attempts the connection status is changed until a successful
attempt is made.
Timeout
A time period (in seconds) allocated for a respond to one ping
request. By default, the value 3 is specified.
Connection restart
Move the switch to the right to reestablish connection if the
maximum number of ping requests fails.
Addresses
IP addresses from the external network that the router will check for
availability via ICMP ping mechanism. By default, the router
checks the IP address 8.8.8.8.
Click the ADD button, and in the line displayed, enter an IP address
or leave value suggested by the router. You can add several
addresses.
To remove an IP address from the list, click the Delete icon ( ) in
the line of the address.
Page 104 of 238
To Next Page
Loading...
