DIR-620S Wireless N300 Router with 3G/LTE Support and
USB Port
User Manual
Configuring via Web-based Interface
In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings.
Figure 97. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
Parameter Description
Dynamic IPv6 Addresses
Mode of dynamic IPv6
address assignment
Select the needed value from the drop-down list.
• Disable: Clients' IPv6 addresses are assigned manually.
• Stateful: The built-in DHCPv6 server of the router allocates
addresses from the range specified in the Address range
fields. Also when this value is selected, the Static IP
Addresses and Hosts sections are displayed on the tab.
• Stateless: Clients themselves configure IPv6 addresses
using the prefix.
Address range
The start and the end values for the latest hextet (16 bit) of the range
of IPv6 addresses which the DHCPv6 server distributes to clients.
Lease time
The lifetime of IPv6 addresses provided to clients.
The default route for
LAN clients
Move the switch to the right to let the clients, that received IPv6
addresses or configured them using the prefix, use the router as the
default IPv6 route.
DNS relay
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
When all needed settings are configured, click the APPLY button.
Page 112 of 238
To Next Page
Loading...
