D16 Group PunchBOX - Page 7

7
www.d16.pl
DESCRIPTION OF OPERATION GENERATORS SECTION
• St. Spread – Wider or narrower stereo image of the played sample. The central posion (Normal) is a neutral seng that plays
the sample without processing.
• Panning – (Stereo) panning.
• High Cut - Low-pass lter cut-o frequency. The parameter operates from 2 [Hz] up to 22 [kHz].
• Low Cut - Hi-pass lter cut-o frequency. The parameter operates from 2 [Hz] up to 22 [kHz].
• Decay – Decay me relave to the overall sample duraon. Max means that the decay me is the same as the sample duraon.
• Tune – Relave sample tuning from -6 up to +6 semitones.
• Send (Click send, Top send, Tools send) – Controlling the proporon between the signal sent to the eect cascade and directly
to Master / Limiter (with the eect cascade bypassed). For the minimum value (0%) the whole signal is sent only to Master / Limiter
(Eects). For the medium value (50%) the generator output is sent in half to the eect cascade and in half to Master / Limiter with
the eect cascade bypassed. For 100% the signal is sent only to the eect cascade.
Each generator provides an addional Sample Management subsecon to browse and load the samples from the Factory or User content,
import the user samples and reset the generator sengs.
Generator’s Sample Management secon