Dacor DOC30M977D User Manual

English 145
Troubleshooting
Information codes
OVEN
Displayed code Possible cause Solution
C-d0
This code occurs if the control key
is short for 1 minute.
Clean the buttons and make sure
there is no water on/around them.
Turn off the oven and try again. If
the problem continues, contact a
local Dacor service center.
C-d1
This code occurs if the door lock is
mispositioned.
Press OFF, and then restart the
oven. If the problem persists,
disconnect all power to the oven
for at least 30 seconds and then
reconnect the power. If this does
not solve the problem, call for
service.
C-F0
This code occurs if communication
between the Main and Sub PBA is
interrupted.
C-F2
This code occurs if communication
between the Main and Touch is
interrupted.
C-10
The cooking sensor is open when
the microwave is operating.
The cooking sensor is short when
the microwave is operating.
C-20
The oven sensor is open when the
oven is operating.
The oven sensor is short when the
oven is operating.
C-21
This code occurs if the internal
temperature rises abnormally
high.
C-23
The temp probe sensor is short
when the oven is operating.
C-30
The PCB sensor is open when the
oven is operating.
The PCB sensor is short when the
oven is operating.
C-31
This code occurs if the PCB
temperature rises abnormally
high.
Call for service.
NQ9300M_MOD_DOC30M977D_DE68-04463A-01_EN.indd 145 5/2/2017 4:00:10 PM

Dacor DOC30M977D Specifications

General

Brand	Dacor
Model	DOC30M977D
Category	Microwave Oven
Language	English