DAELIM ROADWIN VJ125 - Headlight Bulb Replacement; Headlight Case Removal;Installation

19-3
LIGHTS/METER/SWITCHES
HEADLIGHT
BULB REPLACEMENT
● Remove the headlight mounting screws and headlight.
● Disconnect the headlight socket.
● Unhook the bulb retainer and remove the headlight
bulb.
● Install the new headlight bulb aligning its tabs with the
groove in the headlight unit.
● Hook the bulb retainer into the headlight unit groove.
● Connect the headlight socket.
● Install the headlight and tighten the headlight mounting
screws securely.
HEADLIGHT CASE REMOVAL/INSTALLATION
● Remove the headlight case mounting bolts and
headlight case from the headlight stay.
● Disconnect the all cords from the wiring.
● Remove the headlight case.
● Install in the reverse order of removal.
󳢯Headlight bulbs become very hot while the
headlight is ON, and remain hot for a while after
they are turned OFF. Be sure to turn the ignition
switch OFF and let the bulb cool down before
replacement.
󳢯If you touch the bulb with your bare hands, clean
it with a cloth moistened with denatured alcohol
to prevent early bulb failure.
󳢯Avoid touching Halogen headlight bulb. Finger
prints can create hot sport that cause a bulb to
break.
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
HEADLIGHT SOCKET
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
RETAINER
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
ALIGN
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BULB
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS