DAELIM ROADWIN VJ125 - Oil Pump Installation

3-6
LUBRICATION
● Install the pump shaft, oil seal and spacer, then
assemble into the setting ring.
● Install the inner and outer rotors to the pump body.
● Install the dowel pins and oil pump plate into the pump
body.
INSTALLATION
● Install the oil pump into the right crankcase cover and
tighten the bolts with the specified torque.
TORQUE : 1.1 kgf
··
m (11 N
··
m)
● Install the right crankcase cover. (⇨7-12)
● Fill the crankcase with the recommended oil and check
that there is no oil leaks.
󳢯After installing, check the oil pump to operate
smoothly.
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
SETTING RING
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
OIL PUMP
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
FLANGE BOLTS
OIL PUMP PLATE
DOWEL PINS