DAELIM ROADWIN VJ125 - Main Switch Inspection; Main Switch Removal;Installation

19-7
LIGHTS/METER/SWITCHES
MAIN SWITCH
INSPECTION
● Remove the headlight. (⇨19-3)
● Disconnect the main switch wire connector.
● Remove the socket bolts and combi switch.
● Install the new main switch mounting socket bolts and
tighten the bolts to the specified torque.
● Install in the reverse order of removal.
REMOVAL/INSTALLATION
● Remove the headlight (⇨19-3)
● Disconnect the main switch wire connector.
● Release the connector boot from the wire clamp.
● Check for continuity between the wire terminals of the
main switch connector in each switch position.
● Continuity should exist between the color coded wires
as follows:
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
MAIN SWITCH
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
CLAMP
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
MAIN SWITCH CONNECTOR
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
SOCKET BOLTS
ON KEY ON
OFF KEY OFF
LOCK
KEY OFF/LOCK
COLOR R B -
MAIN SWITCH
BAT1 BAT2 KEY