19-10
LIGHTS/METER/SWITCHES
WINKER RELAY
●Remove the rear seat. (⇨12-2)
●Check the following:
- Battery condition
- Burned bulbs
- Burned fuse
- Main switch and winker switch function
- Loose connectors
●If the above items are all normal, check the following:
FUEL UNIT
REMOVEL
●Remove the seat. (⇨12-2)
●Remove the fuel tank cover. (⇨4-3)
●Remove the LH. side cover. (⇨12-2)
●Disconnect the fuel unit coupler.
●Remove the unit set cap and remove the fuel unit from
the fuel tank.
●Remove the base packing.
1. Short the Black and Gray terminals of the winker relay
connector with a jumper wire.
Start the engine and check the winker light by
turning the switch to ON.
Light comes on Light does not come on
Faulty winker relay
Poor connection of the connector
Broken wire harness
·Be careful not to damage the wire.
·Be careful not to damage the float arm.
·Check the base packing for damage.
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
JUMPER WIRE
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
WINKER RELAY
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
FUEL UNIT
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP
UNIT SET CAP