DAELIM ROADWIN VJ125 - Cylinder Head Removal

9-5
CYLINDER HEAD / VALVES
● Manually turn the camshaft bearing outer race, and
check if it turns smoothly.
● Check the bearing for wear or damage.
CYLINDER HEAD
REMOVAL
● Remove the engine from the frame. (section 6)
● Remove the camshaft. (⇨9-3)
● Remove the cylinder head from the cylinder.
● Check the cam lobes of the camshaft for wear or
damage.
● Measure the height of the cam lobe.
SERVICE LIMIT : IN : 37.110 mm
EX: 36.870 mm
󳢯Be sure to check the valve clearance.
CAMSHAFT BEARINGS
● Remove the gasket, dowel pins and cam chain
guide from the cylinder.
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE
CAM CHAIN GUIDE