DAELIM ROADWIN VJ125 - Page 92

● Install the L. rear cover.
● Install the gear change arm a ligning its slit with
the punch mark on the gearshift spindle.
● Install and tighten the pinch bolt to the specified
torque.
TORQUE : 1.2 kgf
··
m (12 N
··
m)
A.C GENERATOR / STARTER CLUTCH
8-9
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
L. REAR COVER
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
PUNCH MARK
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
BOLTS
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM
GEAR CHANGE ARM