©
200416 5-29
Removal and installation
CE ENGINE FUEL SYSTEM
ΧΦ65/75/85 series
4
2
Low-pressure fuel pipes fitted with John
Guest quick-release couplings
Removing low-pressure fuel pipes
1. Disconnect the fuel pipe by pressing in both
lips of the quick-release coupling and
removing the pipe from the quick-release
coupling.
2. Plug the openings.
Fitting low-pressure fuel pipes
1. Clean the quick-release coupling parts.
2. Fit the pipe on the quick-release coupling of
the component and push the pipe onto it until
a clear resistance can be felt and the quick-
release coupling audibly clicks.
3. Bleed the fuel system. See "Inspection and
adjustment".
4. Start the engine and check the fuel system
for leaks.
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
