©
200324 4-11
Removal and installation
PE ENGINE FUEL SYSTEM
CF65/75/85 series
4
5
Installing the pump housing
1. Fit two new lubricating oil connection sealing
rings.
2. Fit the pump housing using the lifting gear
(DAF no. 1329499). Tighten the attachment
bolts to the specified torque. See "Technical
data".
3. Fit the camshaft position sensor.
4. Fit the fuel temperature sensor connector.
5. Fit the electrical connections onto the pump
units.
6. Fit the injection pipes.
7. Connect the fuel pipes of the fuel lift pump.
8. Fit the pressure relief valve onto the pump
housing.
9. Fit the fuel pipes to the pump housing.
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
