PE ENGINE FUEL SYSTEM
4-10
©
200324
Removal and installation
5
CF65/75/85 series
4
6. Remove the timing gear seal by tapping it out
of the timing gear case in the driving
direction.
7. Remove the electrical connections from the
pump units.
8. Remove the fuel pipes from the pump
housing.
9. Remove the pressure relief valve from the
pump housing.
10. Let the fuel leak from the pump housing.
11. Remove the fuel pipes from the fuel lift pump.
12. Remove the fuel injection pipes and plug the
pump units and injectors so that no dirt can
enter the system.
13. Remove the connector from the fuel
temperature sensor (1) (if fitted on the pump
housing).
14. Remove the camshaft position sensor (2).
}
Due to the weight of the pump
housing, use the special tool.
15. Fit the lifting gear (DAF no. 1329499) to the
pump housing and tighten the bolts (A).
16. Remove the attachment bolts of the pump
housing and lift the pump housing off the
dowel pins on the engine block using the
lifting gear.
M200728
i 400529
2
1
i400601
A
A
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
