PE ENGINE FUEL SYSTEM
4-8
©
200324
Removal and installation
5
CF65/75/85 series
4
10. Fit the electrical connections to the pump
unit.
11. Bleed the fuel system. See "Inspection and
adjustment".
4.5 REMOVAL AND INSTALLATION, FUEL LIFT PUMP
}
When removing the fuel lift pump,
fuel will escape. Collect this fuel,
bearing in mind the risk of fire.
}
Dirt in the fuel system can lead to
significant damage to pump units
and housing.
Removing the fuel lift pump
1. Disconnect the earth lead from the battery
terminal.
2. Remove the fuel pipes from the fuel lift pump.
3. Remove the attachment bolts from the fuel
lift pump.
4. Remove the fuel lift pump.
Installing the fuel lift pump
1. Check the sealing ring of the fuel lift pump for
damage. If required, replace the sealing ring.
2. Apply lubricating oil sparingly to the fuel lift
pump sealing ring.
3. Fit the fuel lift pump.
4. Screw in the attachment bolts evenly and
tighten them to the specified torque. See
"Technical data".
5. Connect the fuel pipes.
6. Bleed the fuel system. See "Inspection and
adjustment".
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
