DAF CF85 Series Service Manual

©
200324 4-5
Removal and installation
PE ENGINE FUEL SYSTEM
CF65/75/85 series
4
5
4.3 REMOVAL AND INSTALLATION, INJECTOR SLEEVE
Removing the injector sleeve
1. Partially drain the coolant.
2. Remove the injector.
Insert a ball of crumpled paper into the
injector sleeve to prevent metal particles
from entering the engine.
3. Tap a thread (M22 x 1.5) over a length (A) of
approx. 20 mm in the injector sleeve that is to
be removed.
Turn the special tool (DAF no. 1310425) into
the injector sleeve and, using the special tool
(DAF no. 0694928), remove the injector
sleeve.
Installing the injector sleeve
1. Clean the injector sleeve opening
thoroughly.
Note:
Fit the dry injector sleeve in the cylinder
head.
Use the special tool (DAF no. 1329305) to
tap the injector sleeve into the cylinder head.
2. Fit the injector.
3. Top up the cooling system.
4. Start the engine and check the engine for
leaks.
A
I 400195
https://www.truck-manuals.net/

DAF CF85 Series Specifications

General

Brand	DAF
Model	CF85 Series
Category	Trucks
Language	English