©
200324 3-9
Inspection and adjustment
PE ENGINE FUEL SYSTEM
CF65/75/85 series
4
5
Bleeding by pressurising the fuel tank
}
To prevent deformation of the fuel
tank, the delivery pressure in the fuel
tank must not exceed 0.4 bar.
1. Remove the fuel tank cap and replace it by a
cap with an adjustable air connection.
Note:
Use a cap (without a vent) that has a
connection for a pressure reducer valve.
2. Pressurise the tank to a maximum of 0.2 bar.
3. Loosen the union nut on the injector.
4. Tighten the union nut to the specified torque,
see "Technical data".
5. Repeat points 1, 2 and 3 for the other
injectors.
i400600
13
04
2
i 400237
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
