CE ENGINE INLET/EXHAUST SYSTEM
3-6
©
200416
Inspection and adjustment
3
ΧΦ65/75/85 series
4
5. Loosen the plastic pipe between the air filter
housing and the rubber suction hose on the
turbocharger.
6. Install special tool (DAF no. 0694831) in the
rubber intake port on the turbocharger.
7. Connect an air pipe with reducer valve to the
sealing cap (A) and charge the system to
approx. 1 bar.
8. Use a soapy solution to check the whole inlet
system for air leaks. Also check whether the
pressure gauge of the reducer valve drops.
9. Fit the loosened hoses of the inlet system
and the engine encapsulation.
i 400376
https://www.truck-manuals.net/
To Next Page
Loading...
Need help?
General
