Dahua Technology DH-PFS4210-8GT-150 User Manual

Switch Configuration 66
Parameter
Description
15:Pkts65to127Octets.
16:Pkts128to255Octets.
17:Pkts256to511Octets.
18:Pkts512to1023Octets.
19:Pkts1024to1518Octets
Statistical Group Index
Set up the corresponding
statistics statistical index number,
decided to statistics to monitor the
port number
Sampling Time Interval
Sampling time interval, the scope
for 5 ~ 65535, the unit for seconds
Sampling Type
Sample types for the absolute
value of sampling, the sampling
time arrived directly extracting the
value of a variable
Last Sample Count
Sampling type for change value
sampling, extraction of the arrival
of the sampling time is variable in
the change of the sampling
interval value
Upper Alarm threshold Limit
Set the upper limit the Parameter
values
Lower Alarm threshold Limit
Set the lower limit Parameter
values
Upper Alarm/Lower Alarm
threshold Limit Events
Upper/lower limit reached, for
each event
Owner
Set the table creator, ownername
for 1 ~ 30 characters of a string
【Instruction】
At the time of configuration Rmon Snmp functions must be open, otherwise the prompt dialog
box will appear. This configuration needs to configure statistics groups and events.
【Configuration Example】
Such as: new statistics group of 77 and the event group 345, set up more than 12 and below
the lower limit 3 , Beyond the scope of alarm.

Dahua Technology DH-PFS4210-8GT-150 Specifications

General

Brand	Dahua Technology
Model	DH-PFS4210-8GT-150
Category	Switch
Language	English