Dahua Technology DHI-XVR5116HS-S2 User Manual

User's Manual
162
HDD interface
Configure the settings for the HDD event.
Table 5-44 HDD event configuration
Parameter
Description
Event Type
In the
Event Type
list, select
No HDD
,
HDD Error
, or
HDD No Space
as the
event type.
Enable Enable or disable the HDD event detection function.
Alarm Out
Click
Setting
to display setting interface.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected alarm
box.
Wireless Siren: Enable alarm activation through devices connected by
USB gateway or camera gateway.
Latch
Set a length of time for the Device to delay turning off alarm after the
external alarm is cancelled. The value ranges from 10 seconds to 300
seconds, and the default value is 10 seconds.
Show Message
Select the
Show Message
check box to enable a pop-up message in your
local host PC.
Alarm Upload
Select the
Alarm Upload
check box to enable the system to upload the
alarm signal to the network (including alarm center) when an alarm event
occurs.

Dahua Technology DHI-XVR5116HS-S2 Specifications

General

Brand	Dahua Technology
Model	DHI-XVR5116HS-S2
Category	DVR
Language	English