System Configurations 29
Select resolution.
When video resolution is ﹥ the set resolution, snapshot image adopts
the set resolution.
When video resolution is ﹤ the set resolution, snapshot image adopts
USB is enabled for storage by default.
Click this button to format USB flash drive.
Click this button to select snapshot storage path. See Figure 4-15.
Click to return to the upper level of folder.
Click to create a folder.
Click to refresh the interface.
Snap storage Figure 4-15
Click OK. Step 5
Store in FTP
On the Preview interface, click . Step 1
The Snap & Record interface is displayed. See Figure 4-16.