System Configurations 61
Hardware Figure 4-55
Set the parameters. Refer to Table 4-12. Step 2
Table 4-12 Hardware parameter description
Adjust the volume. It is 0 by default.
After keyboard is locked, log in to the device again to enter it.
Click Save. Step 3
4.6.2.7 MAC
Add MAC through key module, and then execute continuous action groups according to the
adding sequence.
On the local preview interface or TV wall interface, press number key + F2 to call MAC.
Before use, please ensure that you have configured MAC with corresponding numbers.
On the Settings interface, click MAC tab. Step 1
The MAC interface is displayed. See Figure 4-56.
To Next Page
Loading...
