Local Configurations 106
Figure 5-68
Configure the settings for the image parameters. See Table 5-23. Step 2
On the digital channel interface, click More Setting to display more parameters.
In the Channel list, select the channel that you want to configure.
In the Cable Type list, select the cable type that the camera uses.
Not all models support this function.
In the Period list, select a time period for the image settings. The
image settings will be only used during the selected period.
Enable the effective function.
In the Effective Time box, enter the start time and end time for the
period you selected.
Adjusts the color shades. The bigger the value, the lighter the color
will become. This value does not influence the general image
lightness.
The value ranges from 0 to 100. The default value is 50. The
recommended range is between 40 and 60.
To Next Page
Loading...
Need help?
General