Local Configurations 116
Figure 5-75
Click Browse. Step 2
The Browse interface is displayed.
Select the upgrade file and then click OK.
Step 3
The COAXIAL UPGRADE interface is displayed.
You need to insert the USB storage device that contains the upgrading files.
Select the check box of the channel that you want to upgrade. Step 4
Click Start Upgrade. Step 5
If the upgrading is successful, the system pops up a message indicating the upgrading
is completed.
5.6 Configuring Remote Devices
5.6.1 Adding Remote Devices
This function is available after you have configured the channel type as IP channel as
described in previous section, see "5.5.5 Configuring Channel Type."
You can add remote devices by adding the IP address.
Select Main Menu > CAMERA > REGISTRATION > Registration, the Registration interface
is displayed. See Figure 5-76.
To Next Page
Loading...
Need help?
General