Local Configurations 180
Figure 5-142
5.11.2 Configuring Face Detection
You can configure the face detection settings and search the detected faces in the defined time
period.
Not all models support this function.
Only the analog channel 1 supports this function. The IP channel does not support this
function.
SMD, face detection function, and IVS function cannot be enabled at the same time.
5.11.2.1 Configuring Face Detection Settings
When the Device detects the human faces, the system activates alarms.
Select Main Menu > SMART DETECTION > PARAMETERS > Human Face. Step 1
The Human Face interface is displayed. See Figure 5-143.
To Next Page
Loading...
Need help?
General