Local Configurations 251
PEAP: protected EAP protocol.
TLS: Transport Layer Security. Provide privacy and data integrity
between two communications application programs.
It can be configured when Authentication is TLS.
Enable it and click Browse to import CA certificate from flash drive.
The username shall be authorized at server.
Password of the corresponding username.
When Authentication is TLS, click Browse to import from flash drive.
It can be configured when Authentication is TLS.
Table 5-70
Click Apply to complete the settings. Step 4
5.15.2 Configuring Network Testing Settings
5.15.2.1 Testing the Network
You can test the network connection status between the Device and other devices.
Select Main Menu > INFO > NETWORK > Network Test. Step 1
The Network Test interface is displayed. See Figure 5-213.
Figure 5-213