Local Configurations 175
Figure 5-138
Configure the settings for the User event. See Table 5-43. Step 2
In the Event Type list, select Illegal Login.
Enable the user error detection function.
If you do not enable this function, there will be no limit for wrong
password entry and the account cannot be locked because of the
wrong password.
Set the maximum number of allowable wrong password entries. The
account will be locked after your entries exceed the maximum number.
Set how long the account is locked for. The value ranges from 1 minute
to 60 minutes.
Click Setting to display setting interface.
General Alarm: Enable alarm activation through the alarm devices
connected to the selected output port.
External Alarm: Enable alarm activation through the connected
alarm box.
Wireless Siren: Enable alarm activation through devices
connected by USB gateway or camera gateway.
Set a length of time for the Device to delay turning off alarm after the
external alarm is cancelled. The value ranges from 10 seconds to 300
seconds, and the default value is 10 seconds.
To Next Page
Loading...
Need help?
General