Local Configurations 83
Figure 5-42
Open Main Menu interface.
Open the PLAYBACK interface where you can search and play
back record files.
Configure the live view screen as a single-channel layout or
multi-channel layout.
Click Previous Screen to go to the previous screen. For example, if
you are using 4-split mode, the first screen is displaying the
channel 1-4, click Next screen, you can view channel 5-8.
Open the CAMERA REGISTRATION interface. For details, see
"5.6 Configuring Remote Devices
Adding Remote Devices."
Select Record, you can configure the recording mode as
Auto or Manual, or stop the recording. You can also enable or
disable snapshot function
Select Alarm Out, you can configure alarm output settings.
Select General, the layout of live view screen is as default.
Select Show Face List, the detected face snapshots are
displayed in the bottom of the live view screen.
To Next Page
Loading...
Need help?
General