User’s Manual
71
Figure 4-81 Add user
Step 3 Configure the parameters.
Table 4-38 Add user parameters description
Username
Username It can only consist of number, letter, underline and hyphen, the
maximum length contains 15 characters and it cannot be th
existed username.
Password
User’s password and confirm password.
The password can be set from 8 characters to 32 nonblank characters and
contains at least two categories from upper cases, lower cases, numbers and
special characters (excluding “'”, “"”, “;”, “:” and “&”)
Follow the password security prompt to set a high security level password.
Password should be the same as Confirm Password.
Confirm
Password
Group
Name
Select the group that new users belong to. Each group has different authorities.
Memo Remarks on the user.
Operation
Permission
Select the permissions that you want assign to the user.
Restricted
Set the IP address that is restricted to log in, and the restriction time.
To Next Page
Loading...
Need help?
General
