User’s Manual
84
Step 1 Select Setup > System > Auto Maintain.
Figure 4-101 Auto maintain
Step 2 Configure the parameters.
Table 4-41 Auto maintain parameter description
Auto Reboot
The system will automatically restart within the defined period and time.
Select and set restart period and time.
Auto Delete Old
Files
Customize time and delete all the old files before the time.
Manual Reboot Manually restart the Camera.
Step 3 Click Confirm.
4.5.6.7 System Upgrade
Upgrade system of the Camera to keep the camera functions always working. You can upgrade
the system by using upgrade file or through online upgrade.
Upgrading the wrong program might result in the Camera not working properly.
During upgrading, make sure that the Camera is not disconnected from power and network,
and restart or shut down the web.
Online upgrade is not supported in the current version. Do not select Online Upgrade on
the web interface.
Step 1 Select Setup > System > Upgrade.
To Next Page
Loading...
Need help?
General
