Dahua NVR2104HS-P-S3 User Manual

5.11.2 Routing Table
Background Information
You can congure the routing table so that the system can automatically calculate the best path for
data transmission.
Procedure
Step 1 Select Main Menu > NETWORK > TCP/IP > Routing Table.
Figure 5-205 Routing table
Step 2 Add the routing table.
●
Auto add.
When you add a camera to the NVR and the IP address of the camera is not on the
existing routing table, the system will add the routing information.
●
Manual add.
Congure the parameters such as destination address, netmask, and gateway, and
then click Add.
The destination address and netmask must not be on the same LAN.
The netmask must be valid and on the same LAN with the NIC card.
You can congure up to eight pieces of routing information.
Step 3 Click Apply.
5.11.3 Port
Background Information
You can congure the maximum connection for accessing the Device from web, platform, mobile
phone or other clients at the same time, and congure each port number.
Procedure
Step 1 Select Main Menu > NETWORK > Port.
User's Manual
324

Dahua NVR2104HS-P-S3 Specifications

General

Brand	Dahua
Model	NVR2104HS-P-S3
Category	Network Hardware
Language	English